{"title":"Acrylic Plaques","description":"\u003ch2\u003ePrepared for a Ceremony, Then Kept for Years\u003c\/h2\u003e\n\n\u003cp\u003eA similar rush is often experienced with plaque orders from schools. The date of the ceremony is approaching, student names have not yet been finalized, teachers are checking the list, and everyone is looking for a model that will look good without straining the budget too much. Plexiglass plaques are preferred most often at such times.\u003c\/p\u003e\n\n\u003cp\u003eBeing lighter than glass plaques, the ability to be cut into different shapes, and suitability for mass production provide a significant advantage, especially for schools. Different plexiglass plaque models can be prepared for student achievement awards, graduation ceremonies, quiz competitions, sports events, thank-you awards for teachers, and keepsakes for staff leaving the school.\u003c\/p\u003e\n\n\u003cp\u003eOf course, plexiglass plaques are not just a product for schools. Large companies, municipalities, associations, sports clubs, and event companies can also have plexiglass plaques cut specifically for their logos or the events they organize. The fact that plexiglass can be shaped makes it easy to move beyond classic plaque models.\u003c\/p\u003e\n\n\u003cp\u003eWe use plexiglass thicknesses ranging from 2 mm to 5 mm in production. The thickness to be chosen can be determined according to the size of the plaque, its model, the order quantity, and the desired general appearance. While thinner plexiglass can be used for economical and lightweight models, as the thickness increases, the plaque gains a more substantial and prominent stance.\u003c\/p\u003e\n\n\u003cp\u003eWe use plexiglass thicknesses ranging from 2 mm to 5 mm in production. The thickness to be chosen can be determined according to the plaque's size, model, order quantity, and desired overall appearance. While thinner plexiglass can be used for economical and lightweight models, the plaque gains a more solid and prominent appearance as the thickness increases.\u003c\/p\u003e\n\n\u003ch3\u003eAt First Glance It Looks Like One Piece, Actually It Consists of Two Layers\u003c\/h3\u003e\n\n\u003cp\u003eWe prepare our plexiglass plaques in two layers. The bottom section contains the base that forms the main shape of the plaque. The top section contains the decorative pieces that complete the design. Depending on the model, these decorations can be used on the edges, in the header section, around the logo, or at different points on the plaque.\u003c\/p\u003e\n\n\u003cp\u003eBringing two layers together does not only add color to the plaque. Instead of a flat surface, a slight depth is created. Some parts stand out, and the logo or name area is easier to notice. Especially for plaques to be presented on stage, this layered look makes the product look fuller and more attentive.\u003c\/p\u003e\n\n\u003cp\u003eSince the base and the decoration are prepared separately, we have more options regarding the design. Different layouts can be created according to the institution's logo, the school's colors, or the theme of the event. Not every product needs to be overly decorated. Some customers want a simpler model, while others want one that will draw attention from afar on stage.\u003c\/p\u003e\n\n\u003cp\u003eWhat is important here is not to overuse decoration, but not to lose the plaque's main message. The name of the person receiving the plaque, the institution's logo, and the thank-you text should be understood at first glance. Decorative pieces should complement the design, not overshadow the text.\u003c\/p\u003e\n\n\u003ch3\u003eThickness Options Between 2 mm and 5 mm\u003c\/h3\u003e\n\n\u003cp\u003eOne of the most frequently asked questions by customers when choosing a plexiglass plaque is thickness. The difference between 2 mm and 5 mm may not always be fully understood in photos. However, when the product is held in hand, it is seen more clearly that the thickness changes the weight and feel of the plaque.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2 mm plexiglass\u003c\/strong\u003e can be used for lightweight and economical models. It can be preferred by institutions that want to keep the total cost under control, especially in high-volume school orders. It gives a neat result with the right design for small and medium-sized plaques.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3 mm plexiglass\u003c\/strong\u003e is an option that both maintains its lightness and offers a slightly fuller look. It can be used for student awards, teacher plaques, sports competitions, and mass events.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4 mm plexiglass\u003c\/strong\u003e is suitable for customers who want the plaque to look more substantial. It feels thicker when held in hand. It can be preferred for corporate orders, executive thank-you awards, and custom designs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5 mm plexiglass\u003c\/strong\u003e creates a heavier and more powerful look. It can be used for large-scale models, custom-cut company plaques, or important awards prepared in small quantities.\u003c\/p\u003e\n\n\u003cp\u003eWhen choosing thickness, it is not always necessary to choose the thickest plexiglass. In a ceremony where hundreds of students will be awarded, a light and economical plaque may be more appropriate. For a special product to be given to a company executive or an important business partner, a 4 or 5 mm plexiglass may provide a more suitable look.\u003c\/p\u003e\n\n\u003ch3\u003eThere Is a Reason Why Schools Prefer Plexiglass Plaques\u003c\/h3\u003e\n\n\u003cp\u003eIn a school, sometimes dozens or even hundreds of plaques may need to be prepared for a single ceremony. Separate lists are created for graduating students, competition winners, those who show success in sports teams, or teachers who contribute to the school.\u003c\/p\u003e\n\n\u003cp\u003eIn such an order, not only the appearance of the plaque is important; its unit price, weight, ease of transport, and ease of distribution on the day of the ceremony are also important. Plexiglass plaques meet most of these needs. Since it is not as heavy as glass, it is easier to transport large quantity orders and line them up backstage.\u003c\/p\u003e\n\n\u003cp\u003eA plaque prepared for students does not necessarily have to look very serious and formal. More lively designs can be made according to the school's colors, age group, or the subject of the event. While a more vibrant layout is preferred for kindergarten and elementary school events, simpler work can be used for high school, university, or corporate school ceremonies.\u003c\/p\u003e\n\n\u003cp\u003eThe school logo, student's name, grade information, class, and event date can be added to the design. In sports competitions, the branch name; in contests, first or second place ranking; and in graduation plaques, school and term information can be used.\u003c\/p\u003e\n\n\u003cp\u003ePlaques to be given to teachers can include a short thank-you note on behalf of the students. For a teacher who is being reassigned or retiring, their length of service and the mark they left on the school can be mentioned. When the text is long, choosing a larger model provides better results than shrinking the text too much.\u003c\/p\u003e\n\n\u003ch3\u003eWe Are Not Limited to Ready-Made Models for Large Companies\u003c\/h3\u003e\n\n\u003cp\u003eCorporate firms often want a product other than the standard models available in the store or catalog. It may be requested that the plaque be in the shape of the company logo, represent a specific campaign, or be prepared specifically for the organization being held.\u003c\/p\u003e\n\n\u003cp\u003ePlexiglass is a very convenient material for custom cutting. Models inspired by the outlines of the company's logo, its field of activity, or the theme of the event can be produced. An automotive company might want a design close to the form of a vehicle, a construction company a plaque bearing a building silhouette, or a technology company a study using the lines of its own logo.\u003c\/p\u003e\n\n\u003cp\u003eNot every logo may be suitable for direct cutting. If there are very thin lines, narrow connection points, or protrusions that could easily break, the shape is adapted for production. A sturdier cut can be prepared while preserving the initial image of the design.\u003c\/p\u003e\n\n\u003cp\u003eCustom cutting is not only done on the outer shape of the plaque. Decorations on the top layer, logo parts, or header areas can also be cut according to the design. Thus, a product unique to the company, which it will not easily encounter at another organization, emerges.\u003c\/p\u003e\n\n\u003cp\u003eCompanies can use these models for employee of the year awards, dealer meetings, sales achievements, seniority thanks, project completions, and corporate organizations. The same design can be prepared with different names, or small changes can be made according to award categories.\u003c\/p\u003e\n\n\u003ch3\u003eThanks to UV Printing, Not Every Plaque Has to Fit the Same Mold\u003c\/h3\u003e\n\n\u003cp\u003eWe perform prints on plexiglass plaques using the UV printing method. Name, logo, date, thank-you text, and colorful details in the design can be applied to the plexiglass surface. Thanks to this method, studies close to the institution's real logo colors can be prepared without being limited to single-color text.\u003c\/p\u003e\n\n\u003cp\u003eIf a school's colors are navy blue and white, the design can be created with these colors. If a company's corporate identity includes red, orange, or different tones, these colors can be used on the plaque. If a photo or a special image is to be added, placement can be made according to the general structure of the design.\u003c\/p\u003e\n\n\u003cp\u003eThe logo file sent is important for the print to turn out well. A small image taken from the internet or a WhatsApp screenshot may blur when enlarged. If you have a vector logo, this file gives the best result. If there is no vector file, a high-resolution PNG or a clean image can be preferred.\u003c\/p\u003e\n\n\u003cp\u003eIn bulk orders, the design remains the same, but the names and information change. Although this simplifies production, the list sent must be organized. When names are sent in one message, titles in another file, and dates in a different conversation, the probability of error increases.\u003c\/p\u003e\n\n\u003cp\u003eSending names, surnames, titles, and award information in separate columns in an Excel file is one of the healthiest methods. The writing style should also be determined from the beginning. If all surnames are to be written in capital letters, the same layout should be used for the entire list.\u003c\/p\u003e\n\n\u003ch3\u003eVarnish Is Not Used Only to Make Text Shine\u003c\/h3\u003e\n\n\u003cp\u003eAfter UV printing, we apply varnish to certain parts of the design. Varnish makes the text and important details look brighter when they catch light. The person's name, the institution's logo, or the award title thus stand out a little more on the surface.\u003c\/p\u003e\n\n\u003cp\u003eThis brightness is more clearly noticed when the plaque is removed from its box or held under stage lighting. It creates a small transition between the flat print and the layered ornament, giving a more attentive air to the entire design.\u003c\/p\u003e\n\n\u003cp\u003eInstead of polishing every area in the same way, it is necessary to act according to the design. When too much varnish is used, all sections try to grab attention at the same time. For this reason, specific points such as name, title, logo, or decoration can be brought to the forefront.\u003c\/p\u003e\n\n\u003cp\u003eVarnish can create a nice effect, especially in dark-colored text and large headers. However, the area where it will be used is determined according to the color and design of the plaque. The goal is not to make the product unnecessarily shiny, but to add a small emphasis to important sections.\u003c\/p\u003e\n\n\u003ch3\u003eA Plexiglass Plaque Is Not Just an Achievement Award\u003c\/h3\u003e\n\n\u003cp\u003eWhen plexiglass plaques are mentioned, student achievement awards may come to mind first. However, its area of use is much wider than that.\u003c\/p\u003e\n\n\u003cp\u003eIt can be used in schools for graduation, teachers' day, quiz competitions, sports competitions, end-of-year events, and club activities. It can be prepared for successful students, teachers, school administrators, and people who support the event.\u003c\/p\u003e\n\n\u003cp\u003eIn companies, it can be preferred for employee awards, retirement, seniority, project success, sales goals, and dealer thank-you awards. When custom cutting specific to the company's logo is done, the plaque gains a more corporate appearance.\u003c\/p\u003e\n\n\u003cp\u003eMunicipalities and public institutions can give plexiglass plaques to speakers or contributors at festivals, panels, conferences, seminars, and social responsibility events.\u003c\/p\u003e\n\n\u003cp\u003eSports clubs can have special designs prepared for players, coaches, managers, and sponsors. Different cuts describing a soccer ball, jersey, club crest, or sport can be used.\u003c\/p\u003e\n\n\u003cp\u003eAssociations and foundations can have thank-you plaques made for volunteers, board members, and donors. Event companies can also have models prepared that are appropriate for the theme of the event they are organizing and have not been used before.\u003c\/p\u003e\n\n\u003ch3\u003eName and Text Control Is One of the Most Important Stages of Production\u003c\/h3\u003e\n\n\u003cp\u003eNo matter how high quality the material of the plaque is, if the person's name is spelled incorrectly, the product loses all its meaning. Especially in bulk orders, the name list is the subject that needs the most attention.\u003c\/p\u003e\n\n\u003cp\u003eSimilar names, double surnames, academic titles, and foreign names must be checked by the person placing the order. It may be necessary to reproduce the relevant part in order to change the texts that have gone to print later.\u003c\/p\u003e\n\n\u003cp\u003eThe same situation applies to thank-you texts. Institution name, date, event title, and signature areas must be finalized before printing. When the date is different on one plaque and the institution name is missing on another, the irregularity is immediately noticed when the products are brought side by side.\u003c\/p\u003e\n\n\u003cp\u003eText length also affects the model to be chosen. Adding a long paragraph, several logos, and two signatures to a small plaque compresses the design. In such a case, a larger model can be chosen, or the message can be made shorter and clearer.\u003c\/p\u003e\n\n\u003ch3\u003eBeing Lightweight Does Not Mean It Will Look Low Quality\u003c\/h3\u003e\n\n\u003cp\u003ePlexiglass is a lighter material than glass. However, with the right thickness, double-layer production, UV printing, and varnish application, very remarkable plaques can be prepared.\u003c\/p\u003e\n\n\u003cp\u003eEspecially in organizations where awards will be presented to many people on stage, lightness is not a disadvantage, but on the contrary, it provides convenience. Transporting, arranging, and presenting the plaques to individuals is more practical.\u003c\/p\u003e\n\n\u003cp\u003eWhen thick plexiglass and custom cutting are used, products with a more substantial look suitable for corporate firms emerge. In other words, one should not think of the plexiglass plaque only as an economical school product. Depending on the design and the material used, it can be moved to a very different level.\u003c\/p\u003e\n\n\u003cp\u003eA hundred plain student plaques can be produced for a school, or only five custom-cut and thick plexiglass awards can be prepared for a company. Even if the material is the same, the intended use and design completely change the product.\u003c\/p\u003e\n\n\u003ch3\u003eA Few Pieces of Information Are Enough to Start the Order\u003c\/h3\u003e\n\n\u003cp\u003eFirst, it is determined how many plaques are needed and who they will be given to. Then, one of the ready-made models can be selected, or a custom cutting request can be submitted.\u003c\/p\u003e\n\n\u003cp\u003eFrom the thicknesses between 2 mm and 5 mm, the one suitable for the model and budget is determined. The logo to be used, person names, award title, date, and thank-you text are sent. In bulk orders, the information is prepared in a regular list.\u003c\/p\u003e\n\n\u003cp\u003eThe base and ornament layer are cut according to the selected design. UV printing is applied, and text and important details are highlighted with varnish. After the layers are brought together, the general check of the plaque is done.\u003c\/p\u003e\n\n\u003cp\u003eThe resulting product is not just a piece of plexiglass with a name on it. It turns into a keepsake that a student can keep for years regarding their first achievement, an employee's years of labor, or an institution's gratitude.\u003c\/p\u003e\n\u003ch2\u003eSpecial Design Plexiglass Plaque Models: Prepared for Ceremonies, Kept for Years\u003c\/h2\u003e\n\u003cp\u003eA similar rush is often experienced with plaque orders from schools. The date of the ceremony is approaching, student names have not yet been finalized, teachers are checking the list, and everyone is looking for a model that will look good without straining the budget too much. Plexiglass plaques are preferred most often at such times.\u003c\/p\u003e\n\u003cp\u003eBeing lighter than glass plaques, the ability to be cut into different shapes, and suitability for mass production provide an important advantage. Different plexiglass plaque models can be prepared for student achievement awards, graduation ceremonies, quiz competitions, sports events, thank-you awards for teachers, and keepsakes for staff leaving the school.\u003c\/p\u003e\n\u003cp\u003eOf course, plexiglass plaques are not just a product for schools. Large companies, municipalities, associations, sports clubs, and event companies can also have plexiglass plaques cut specifically for their logos or the events they organize. The fact that plexiglass can be shaped with lasers makes it easy to move beyond classic plaque models.\u003c\/p\u003e\n\n\u003ch3\u003eAt First Glance It Looks Like One Piece, Actually It Consists of Two Layers\u003c\/h3\u003e\n\u003cp\u003eWe prepare our plexiglass plaques in two layers. The bottom section contains the base that forms the main shape of the plaque. The top section contains the decorative pieces that complete the design. Depending on the model, these decorations can be used on the edges, in the header section, around the logo, or at different points on the plaque.\u003c\/p\u003e\n\u003cp\u003eBringing two layers together does not only add color to the plaque. Instead of a flat surface, a slight depth is created. Some parts stand out, and the logo or name area is easier to notice. Especially for plaques to be presented on stage, this layered look makes the product look fuller and more attentive. Different layouts can be created according to the institution's logo or the theme of the event; decorative pieces complement the design but do not overshadow the text.\u003c\/p\u003e\n\n\u003ch3\u003ePlexiglass Plaque Thickness Options: Differences Between 2 mm and 5 mm\u003c\/h3\u003e\n\u003cp\u003eOne of the most frequently asked questions by customers when choosing a plexiglass plaque is thickness. The difference between 2 mm and 5 mm may not always be fully understood in photos. However, when the product is held in hand, it is seen more clearly that the thickness changes the weight and feel of the plaque.\u003c\/p\u003e\n\u003cul\u003e\n\n    \u003cli\u003e\n\n\u003cstrong\u003e2 mm Plexiglass:\u003c\/strong\u003e Can be used for lightweight and economical models. It is preferred by institutions that want to keep total costs under control, especially in high-volume school orders.\u003c\/li\u003e\n\n    \u003cli\u003e\n\n\u003cstrong\u003e3 mm Plexiglass:\u003c\/strong\u003e An option that both maintains its lightness and offers a slightly fuller look. It is frequently used for student awards, sports competitions, and mass events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\n\u003cstrong\u003e4 mm Plexiglass:\u003c\/strong\u003e Suitable for customers who want the plaque to look more substantial. It can be preferred for corporate orders, executive thank-you awards, and custom designs.\u003c\/li\u003e\n\n    \u003cli\u003e\n\n\u003cstrong\u003e5 mm Plexiglass:\u003c\/strong\u003e Creates a heavier and more powerful look. It is used for large-scale models, custom-cut company plaques, or important awards prepared in small quantities.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow Are Plexiglass Plaque Prices Determined?\u003c\/h3\u003e\n\u003cp\u003ePlexiglass plaque prices are determined according to the thickness of the material chosen, the dimensions of the design, the special laser cutting workmanship to be applied, and the total number of orders. In high-volume production, unit costs are optimized to offer budget-friendly solutions. Thanks to its lightweight structure, it also provides additional advantages in cargo and transport processes.\u003c\/p\u003e\n\n\u003ch3\u003eWe Are Not Limited to Ready-Made Models for Large Companies\u003c\/h3\u003e\n\u003cp\u003eCorporate firms often want a product other than the standard models available in the catalog. It may be requested that the plaque be in the shape of the company logo, represent a specific campaign, or be prepared specifically for the organization. Models inspired by the outlines of the company's logo or its field of activity can be produced. An automotive company might want a design close to the form of a vehicle, or a construction company might want a plaque bearing a building silhouette. A product unique to the company, which it will not easily encounter at another organization, emerges.\u003c\/p\u003e\n\n\u003ch3\u003eUV Printing and Varnish: Colors and Brightness Under Control\u003c\/h3\u003e\n\u003cp\u003eWe perform prints on plexiglass plaques using the UV printing method. Thanks to this method, studies close to the institution's real logo colors can be prepared without being limited to single-color text. To ensure the print turns out well, vector logos or high-resolution PNG files should be preferred.\u003c\/p\u003e\n\u003cp\u003eFollowing UV printing, we apply varnish to specific parts of the design. Varnish makes areas such as names, corporate logos, or award titles appear glossier on the surface. The goal is not to unnecessarily make the entire product shiny, but to add a small, aesthetic accent to important sections.\u003c\/p\u003e\n\n\u003ch3\u003eMost Preferred Plexiglass Plaque Text Examples\u003c\/h3\u003e\n\u003cp\u003eNo matter how high-quality the material and design are, it is the message on the plaque that gives it meaning. Here are some popular text examples to inspire your ceremonies:\u003c\/p\u003e\n\u003cul\u003e\n\n    \u003cli\u003e\n\n\u003cstrong\u003eSchool and Graduation:\u003c\/strong\u003e \"We congratulate you for your outstanding effort and achievements in your educational life and wish you a bright future.\"\u003c\/li\u003e\n\n    \u003cli\u003e\n\n\u003cstrong\u003eCorporate Appreciation:\u003c\/strong\u003e \"We thank you for the innovative vision and dedicated work you have contributed to our company.\"\u003c\/li\u003e\n\n    \u003cli\u003e\n\n\u003cstrong\u003eSports and Organizations:\u003c\/strong\u003e \"We sincerely congratulate you on your outstanding performance and ranking in the [Tournament Name] competitions.\"\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eName Verification and the Ordering Process Are the Most Important Stages of Production\u003c\/h3\u003e\n\u003cp\u003eNo matter how high-quality the material of the plaque is, if the person's name is misspelled, the product loses all its meaning. For bulk orders, the most reliable method is to provide the first name, last name, title, and award information in separate columns in an Excel file with a standardized format (for example, all surnames in capital letters).\u003c\/p\u003e\n\u003cp\u003eOnce the number of plaques required is determined and the logo and texts to be used are submitted, the base and decorative layers are laser-cut, and UV printing and varnish are applied. The resulting product is not just a piece of plexiglass with a name on it; it is a stylish keepsake that a student can cherish for years to commemorate their first success, an employee's years of hard work, or an institution's gratitude.\u003c\/p\u003e","products":[{"product_id":"ogrenciye-ozel-yildiz-plaket-pleksi","title":"Student Special Star Plaque - Plexiglass","description":"\u003cp\u003e\u003cstrong\u003ePlexiglass star plaque\u003c\/strong\u003e is specially designed for those who want to celebrate success with a stylish and modern design. It is a fantastic choice for teachers and parents who want to appreciate the first steps students take on their educational journey, encourage them, and leave them with an unforgettable memory.\u003c\/p\u003e\u003cp\u003eOur product is made using high-quality \u003cstrong\u003e2 mm thick black plexiglass\u003c\/strong\u003e material. Offering a contemporary look with its glossy surface and gold-detailed star figure, this model is personalized with \u003cstrong\u003eultra-clear UV printing\u003c\/strong\u003e. Details such as the student's name, a special message, and the teacher's name are added entirely according to your preference.\u003c\/p\u003e\u003cp\u003eThis plaque is ideal for the following areas of use:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePrimary school and kindergarten graduation ceremonies\u003c\/li\u003e\n\n\u003cli\u003eEnd-of-year achievement awards\u003c\/li\u003e\n\n\u003cli\u003eMotivation and appreciation gifts\u003c\/li\u003e\n\n\u003cli\u003eAs awards in corporate training programs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe average size of the plexiglass plaque is 18x14 cm. It is suitable for tabletop display, and a fixed base that allows it to stand upright is included with the product. Thanks to its laser-cut lines, it displays both an aesthetic and symmetrical appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppeal to students' hearts with a modern design and a personal touch. Order now, and let us prepare an inspiring gift!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Komut","offers":[{"title":"Writing","offer_id":45217221083206,"sku":"PLK-02-yazi","price":100.0,"currency_code":"TRY","in_stock":true},{"title":"Text + Logo","offer_id":45217221115974,"sku":"PLK-02-yazi-logo","price":105.0,"currency_code":"TRY","in_stock":true},{"title":"Text + Image","offer_id":45217221148742,"sku":"PLK-02-yazi-gorsel","price":115.0,"currency_code":"TRY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/4478\/7526\/files\/ogrenciye-ozel-yildiz-plaket-seffaf-pl-bb43e0.jpg?v=1783074788"}],"url":"https:\/\/komutuv.com\/en\/collections\/pleksi-plaketler.oembed","provider":"Komut UV Baskı ve Üretim Merkezi","version":"1.0","type":"link"}